61
ISO Speed/Gain
Adjusting the ISO/Gain Value
1 Press the ISO/GAIN button.
• The current ISO speed/gain value will be highlighted in
orange.
2 Push the joystick up/down to select the desired ISO
speed or gain value and then press the joystick.
• The selected ISO speed/gain value will be set and the display
will return to normal.
• You can also adjust the ISO speed/gain value using only the
joystick (A 56).
Remote Operation Using Browser Remote
After completing the necessary preparations (A 153), you can adjust the ISO speed/gain remotely from a Wi-Fi-
enabled device using the Browser Remote application.
1 Press [ISO] and then the desired setting ([ISO] or [Gain]) to change.
2 Press the current ISO speed or gain value and select the desired value from the list.
• You may need to scroll up/down to see all the available values.
• The selected value will be displayed on the Browser Remote screen and will be applied on the camcorder.
NOTES
• When high ISO speeds or gain levels are set, the picture may flicker slightly.
• When high ISO speeds or gain levels are set, bright red, green or blue dots may appear on the screen. In such
case, use a faster shutter speed (A 57) or select a lower ISO speed or gain value.
• When the ISO speed or gain level is changed, some noise may appear momentarily on the screen. Do not
adjust the ISO speed/gain level while recording.
• When an optional RC-V100 Remote Controller is connected to the camcorder, you can adjust the ISO speed
or gain value with the remote controller's ISO/GAIN Í/Î buttons.
Commentaires sur ces manuels