Canon C100 Manuel d'instructions télécharger pdf (Page 53)

Recording Video

NOTES

• Depending on the ambient temperature and other shooting conditions, the cooling fan may not turn off even if

you set [Fan] to [Automatic].

• The cooling fan cannot be turned off in mode.

• When changing the camcorder's configuration, be careful not to obstruct the cooling fan's air intake and

exhaust vents (marked respectively as AIR INTAKE and EXHAUST VENT).

Canon Log Gamma and CINEMA Preset

The Canon Log gamma setting makes use of the image sensor to offer

spectacular dynamic range. The easiest way to activate Canon Log

gamma is to use the CINEMA preset settings. In addition to Canon Log

gamma, the CINEMA preset settings use also other preset picture-related

settings designed with professional cinematography in mind. Note that

when you use CINEMA preset settings, other custom picture settings will

be "locked", making them unavailable for you to change.

With the CINEMA preset settings, the gamma and color matrix (A 114) will be set to the Canon Log setting,

which will be applied to image recorded on an SD card and output from the HDMI OUT terminal.

Clips recorded using Canon Log gamma need to be processed in post-production. During post-production, you

can apply a LUT (look-up table) to clips recorded using Canon Log gamma to view the clips with more natural

colors. For details about available LUTs, visit your local Canon Web site.

1 Open the [/ CINEMA Locked] submenu to activate the CINEMA preset settings.

[~ Camera Setup] > [/ CINEMA Locked]

2 Select [On] and then press the joystick.

• All picture-related settings will be set according to the CINEMA preset values.

•[/ LOCKED] appears on the left of the screen.

Checking the Image from Canon Log Gamma

When Canon Log gamma is used, the image displayed on the screen will appear darker than usual. You can use

the view assistance function to display an image that approximates the one that would be obtained using a

normal gamma setting. View assistance is applied on the camcorder screen and can also be applied to a

monitor connected to the HDMI OUT terminal. It will not appear in your recordings.

When you are shooting with Canon Log gamma and are checking the picture on an external monitor connected

to the HDMI OUT terminal, you can apply a LUT to the output (A 138).

Activating View Assistance

1 Open the [View Assist.] submenu.

[£ OLED/VF Setup] > [View Assist.]

2 Select [On] and then press the joystick.

• will appear on the lower left of the screen.

NOTES

• You can enable Canon Log gamma also by selecting the [C9: CINEMA] custom picture file (A 111). In such

case, you can adjust other custom picture settings.

[~ Camera Setup]

[/ CINEMA Locked]

[Off]

[£ OLED/VF Setup]

[View Assist.]

[Off]

COPY

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 213 214

Commentaires sur ces manuels

Pas de commentaire

Canon C100 Manuel d'instructions Page 53

Commentaires sur ces manuels

Produits connexes et manuels pour Caméscopes Canon C100