Canon imagePROGRAF iPF750 Basic guide No.3 Manuel d'utilisateur Page 721

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 742
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 720
Messages regarding printing or adjustment
Messages regarding printing or adjustment
Cannot adjust printhead.
Cause Corrective Action
The Printhead nozzles are clogged. Execute Head Posi. Adj. again, as follows.
1. Press the OK button to clear the error .
2. Print a test pattern to check the nozzles.
( P .630)
3. Clean the Printhead if the nozzles are clogged.
( P .632)
4. Execute Head Posi. Adj. again.
( P .604)
The Printhead cannot be aligned; highly transparent
lm is loaded.
Press the OK button to clear the error .
W e recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
( P .604)
The Printhead is installed crooked. Straighten the Printhead as follows, and then execute
Head Posi. Adj. again.
1. Press the OK button to clear the error .
2. Use Head Inc. Adj. to adjust the angle of
inclination of the Printhead .
( P .608)
3. Execute Head Posi. Adj. again.
( P .604)
Cannot adjust paper feed.
Cause Corrective Action
The Printhead nozzles are clogged. Execute Adj. Quality again, as follows.
1. Press the OK button to clear the error .
2. Print a test pattern to check the nozzles.
( P .630)
3. Clean the Printhead if the nozzles are clogged.
( P .632)
4. Execute Adj. Quality again.
( P .614)
Highly transparent lm is loaded that cannot be used
for automatic feed amount adjustment.
Press the OK button to clear the error , and then
adjust the feed amount manually .
( P .616)
Error Message 705
Vue de la page 720
1 2 ... 716 717 718 719 720 721 722 723 724 725 726 ... 741 742

Commentaires sur ces manuels

Pas de commentaire