Canon LASERBASE MF3110 Manuel d'utilisateur télécharger pdf (Page 98)

LCD Messages

9-8

Troubleshooting

LCD Messages

The following messages are displayed in the LCD when the machine performs a

function or if it encounters an error.

ADJUSTING

WAITING TO SCAN

Cause The machine is not ready for copying because you have just connected the

power cord to the machine.

Remedy Wait for a while. The machine cannot scan documents for copying immediately

after the power cord is connected.

CHECK PAPER SIZE

Cause The size of the paper in the cassette or multi-purpose feeder is different from

that of the paper specified in <PAPER SETTINGS> of the Menu.

Remedy Load the correct paper size or change <PAPER SIZE> in <PAPER SETTINGS>

of the Menu. (See "Loading Paper," on p. 2-4, or "Specifying the Paper Size," on

p. 2-11.)

Then reset the machine by opening the front cover and then closing it.

CHECK PRINTER

Cause A problem has occurred in the printer.

Remedy Reset the machine by opening the front cover and then closing it. If the

message persists, unplug the machine from the power supply and contact

Canon Authorized Service Facilities or the Canon Customer Care Center.

CHECK PRINTER COVER

Cause The front cover is not closed completely.

Remedy Check the front cover, and make sure that it is completely closed.

INSTALL CARTRIDGE

Cause The cartridge is not installed or not installed correctly.

Remedy Install the cartridge correctly. (See "Replacing the Cartridge," on p. 8-13.)

LD_Basic_US.book Page 8 Wednesday, June 30, 2004 2:02 PM

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 119 120

Pas de commentaire

Canon LASERBASE MF3110 Manuel d'utilisateur Page 98