Canon LASERBASE MF3110 Manuel d'utilisateur télécharger pdf (Page 56)

Making Copies

5-2

Copying

Making Copies

NOTE

•

When making copies on LTR-size paper after having continuously copied on paper

smaller than LTR-size paper, the copies may be dirty. To prevent copies from being dirty,

wait about 1 minute before making copies.

•

When making copies of a small size or heavy paper*, etc., the copy speed may be

slightly slower than usual.

* The paper type should be selected in the Menu. (See "Specifying the Paper Type," on p.

2-12.)

•

If you intend to make a copy and print with a thermal transfer printer using the same

sheet of paper, make the copy first. Failure to do so may make copies dirty or cause a

paper jam.

•

When copying onto transparencies, remove each transparency from the output tray as it

is output.

Place the document on the platen glass.

For details on how to place documents, see "Placing a Document on the Platen Glass,"

on p. 3-3.

Press [COPY].

Use the numeric keys to enter the number of copies.

You can set up to 99 copies.

Adjust any necessary settings for your document.

• Specify the size and the type of the paper you load in the cassette or the

multi-purpose feeder. (See "Specifying the Paper Size and Type (Common for

Cassette and Multi-Purpose Feeder)," on p. 2-11.)

• Press [Image Quality] to select the scanning resolution. (See "Adjusting the Image

Quality (Resolution)," on p. 5-6.)

• Press [Exposure] to select the scanning exposure. (See "Adjusting the Exposure

(Density)," on p. 5-6.)

• Press [Enlarge/Reduce] to select the copy ratio. (See "Setting Enlarging/Reducing,"

on p. 5-4.)

LD_Basic_US.book Page 2 Wednesday, June 30, 2004 2:02 PM

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 119 120

Pas de commentaire

Canon LASERBASE MF3110 Manuel d'utilisateur Page 56