Canon LASERBASE MF3110 Manuel d'utilisateur télécharger pdf (Page 107)

Printing Problems

9-17

Troubleshooting

Printing Problems

The Alarm indicator comes on.

Q Does the machine feed paper correctly, or is there paper in the cassette or

multi-purpose feeder?

A Clear the paper jam, or load paper in the cassette or multi-purpose feeder. (For

instructions on clearing paper jam, see "Clearing Jams," on p. 9-1. For

instructions on loading paper, see "Loading Paper," on p. 2-4.)

A If the machine has no paper jam, or paper is loaded in the cassette or

multi-purpose feeder, unplug the machine and wait approximately 3 minutes to

5 minutes, then plug it in again. If the problem is fixed, the Alarm indicator will

turn off, and the LCD will return to the standby mode. If the Alarm indicator

remains flash, unplug the machine, and contact Canon Authorized Service

Facilities or the Canon Customer Care Center.

Printout does not match paper size.

Q Is the paper stack loaded and aligned correctly in the cassette, or is paper

loaded in the multi-purpose feeder correctly?

A Make sure the paper is loaded and aligned correctly in the cassette or the paper

is loaded correctly in the multi-purpose feeder. (See "Loading Paper," on p. 2-4.)

LD_Basic_US.book Page 17 Wednesday, June 30, 2004 2:02 PM

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 119 120

Pas de commentaire

Canon LASERBASE MF3110 Manuel d'utilisateur Page 107