Canon MF8450c Guide de l'utilisateur télécharger pdf (Page 70)

2-17

Loading Paper

Originals and Print Media

■ To print on the back side of preprinted

paper

①

Load the preprinted paper face up into the

stack bypass tray, as shown in the

illustration below.

The screen for selecting the paper size appears.

When loading paper into the stack bypass tray,

align the paper stack neatly between the slide

guides. If the paper is not loaded correctly, a

paper jam may occur.

If you are printing on heavyweight paper or

envelopes using the stack bypass tray, and nd

that the paper or envelopes are not being fed

smoothly or evenly through the stack bypass

tray, remove the paper or envelopes, curl the

feeding edges upward approximately 1/8"

(3 mm), and then reload the paper or

envelopes. Curling the feeding edges enables

the rollers to grip the paper or envelopes as

they are fed into the machine from the stack

bypass tray.

If there are instructions on the paper package

about which side of the paper to load, follow

those instructions.

When the paper is loaded into the stack bypass

tray, the side facing down is the one printed on.

If problems, such as poor print quality or paper

jams occur, try turning the paper stack over

and reload it.

–

–

–

–

–

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 503 504

Commentaires sur ces manuels

Pas de commentaire