Canon EOS 80D Manuel d'utilisateur télécharger pdf (Page 172)

170

In Creative Zone modes, just press the

<D> button to raise the built-in flash for

flash photography.

Before shooting, check that [D] is

displayed in the viewfinder. After shooting,

push the built-in flash back down with your

fingers until it clicks into place.

In Basic Zone modes, depending on the shooting mode, you can set the

built-in flash with Quick Control (p.101).

The table below shows the shutter speed and aperture settings that will

be used with flash.

D Using the Built-in Flash

Shooting Mode Shutter Speed Aperture

d Automatically set (1/250 sec. - 1/60 sec.) Automatically set

s Manually set (1/250 sec. - 30 sec.) Automatically set

f Automatically set (1/250 sec. - 30 sec.) Manually set

a Manually set (1/250 sec. - 30 sec.) Manually set

Exposure continues while you hold down

the shutter button or while the bulb timer is

operating.

Manually set

Flash Photography in the <f> Mode

To obtain a correct flash exposure, the flash output will be set automatically

(autoflash exposure) to match the manually-set aperture. The shutter speed

will be set automatically between 1/250 sec. - 30 sec. to suit the scene’s

brightness.

In low light, the main subject is exposed with the auto flash metering, and

the background is exposed with a slow shutter speed set automatically. Both

the subject and background look properly exposed with a touch of

atmosphere (automatic slow-speed flash sync). If you are handholding the

camera, keep it steady to prevent camera shake. Using a tripod is

recommended.

To prevent a slow shutter speed, under [z1: Flash control], set [Flash

sync. speed in Av mode] to [1/250-1/60sec. auto] or [1/250 sec. (fixed)].

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 307 308

Pas de commentaire

Canon EOS 80D Manuel d'utilisateur Page 172