Canon EOS 80D Manuel d'utilisateur télécharger pdf (Page 159)

157

d: Program AE

 If the “30"” shutter speed and the lowest f/number

blink, it indicates underexposure.

Increase the ISO speed or use flash.

 If the “8000” shutter speed and the highest f/number

blink, it indicates overexposure.

Lower the ISO speed or use an ND filter (sold

separately) to reduce the amount of light entering the

lens.

Differences Between <d> and <A> Modes

In the <A> mode, many functions, such as the AF operation and metering

mode, are set automatically to prevent spoiled shots. The functions you can

set are limited. With <d> mode, only the shutter speed and aperture are set

automatically. You can freely set the AF operation, metering mode, and

other functions.

Program Shift

 In the Program AE mode, you can freely change the shutter speed and

aperture combination (Program) set automatically by the camera while

maintaining the same exposure. This is called Program shift.

 To shift the program, press the shutter button halfway, then turn the

<6> dial until the desired shutter speed or aperture is displayed.

 Program shift will be canceled automatically when the metering timer

(0) ends (exposure setting display turns off).

 Program shift cannot be used with flash.

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 307 308

Pas de commentaire

Canon EOS 80D Manuel d'utilisateur Page 159