Canon 1650 Manuel d'utilisateur télécharger pdf (Page 47)

AXIS 1650 User’s Manual Print Server Management and Configuration

Subnet Mask

Specify the subnet mask used for determining when the traffic should be sent via a router. This

number combined with the IP address identifies on which network the print server is located.

The normal class C subnet mask value is usually 255.255.255.0.

Default value: 0.0.0.0, indicates that all network segments are accessible.

Default Router

Specify the IP address for the default router. All traffic directed outside the local network,

defined by the subnet mask, is sent to the default router. Any re-routing via other routers is

done automatically. The setting 0.0.0.0 indicates that no default router is set. If that is the case,

the print server anticipates that there is a router available that automatically senses and

redirects the print server's packets to destinations outside the local network segment.

Default value: 0.0.0.0

DNS Server Address

Specify the IP address for the DNS (Domain Name Server). DNS uses NetBIOS names to allow

clients to locate resources on TCP/IP networks.

Default = 0.0.0.0

DNS Dynamic Update

Select Yes to enable DNS (Domain Name Server). DNS uses NetBIOS names to allow clients to

locate resources on TCP/IP networks.

Default value = No

DNS Host name

Specify DNS Host name. This name will be used in all environments as the identifier of your

print server.

Default value = <blank>

DNS Domain Name

Specify the name of the domain to which the print server belongs. Domain refers to a set of

computers on a network that have been assigned a group name. A domain might contain two or

more workgroups.

Default = <blank>

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 70 71

Pas de commentaire

Canon 1650 Manuel d'utilisateur Page 47