Canon 1650 Manuel d'utilisateur télécharger pdf (Page 48)

Print Server Management and Configuration AXIS 1650 User’s Manual

WINS Enabled

Select the appropriate radio button to enable WINS (Windows Internet Name Service) over

TCP/IP. WINS uses NetBIOS names to allow Windows-based clients to locate resources on TCP/IP

networks.

Default value = Yes

WINS Server Address

Specify the IP address of the primary WINS server. The WINS server is used for identifying

computers with host names instead of IP addresses.

Default value =0.0.0.0

WINS Host Name

Specify the WINS host name, which will be used as the identifier of your print server.

Default = <blank>

Scope ID

Specify the NetBIOS scope to which the print server belongs. The scope ID is a character string

value that is appended to the NetBIOS name and used for all NBT communication. The scope ID

defines a group of computers that recognizes a registered NetBIOS name. Computers with the

same scope ID will be able to hear each others' NetBIOS "traffic" or messages.

Default value = <empty> which specifies the default scope.

SLP enabled

Enable or disable SLP communication to and from the print server.

Default = Yes

SLP scope list

Specify the name of the SLP scope to which the print server belongs. The scope refers to a set of

computers on a network that have been assigned a scope name.

Default value = DEFAULT

SNTP Server Address

Specify Time server IP address or Network Name.

Default = <blank>

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 70 71

Pas de commentaire

Canon 1650 Manuel d'utilisateur Page 48