Canon PIXMA MG2550S Manuel d'utilisateur télécharger pdf (Page 145)

Colors Are Unclear

Watch the movie

Check1

Is the Nozzle Check Pattern printed properly?

Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles.

Refer to When Printing Becomes Faint or Colors Are Incorrect for the Nozzle Check Pattern printing, Print Head

Cleaning, and Print Head Deep Cleaning.

•

If the Nozzle Check Pattern is not printed correctly:

After performing the Print Head Cleaning, print the Nozzle Check Pattern and examine the pattern.

•

If the problem is not resolved after performing the Print Head Cleaning twice:

Perform the Print Head Deep Cleaning.

If the problem is not resolved after performing the Print Head Deep Cleaning, turn off the machine and

perform another Print Head Deep Cleaning after 24 hours.

•

If the problem is not resolved after performing the Print Head Deep Cleaning twice:

Ink may have run out. Replace the FINE cartridge.

Check2

When a FINE cartridge runs out of ink, replace it with a new one.

Check3

Is the FINE cartridge installed properly?

If the FINE cartridge is not installed securely, ink may not be ejected correctly.

Retract the output tray extension and the paper output tray, open the cover, then remove the FINE cartridges.

Then install the FINE cartridges again. Push the FINE cartridge until it clicks into place.

After confirming that the FINE cartridge is installed properly, close the cover.

Note

• Printed colors may not match screen colors due to basic differences in the methods used to produce

colors. Color control settings and environmental differences can also affect how colors appear on the

screen. Therefore, colors of printing results may be different from those on the screen.

145

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 402 403

Pas de commentaire

Canon PIXMA MG2550S Manuel d'utilisateur Page 145