Canon image runner 2535 Guide de l'utilisateur télécharger pdf (Page 47)

Loading Paper in the Stack Bypass

2-22

Basic Operations

• Rolled or curled paper must be straightened out prior to use so that it can be fed

smoothly through the stack bypass (allowable amount of curling: less than 10 mm for

normal paper and less than 5 mm for heavyweight paper).

• The stack bypass may not accept paper that has absorbed moisture.

• Do not load a mixture of different paper sizes and types.

• Make sure that the paper type setting is correct. An incorrect paper type setting may

adversely affect the image quality, damage the fixing unit, and cause paper jams.

• Feed label sheets one sheet at a time, and remove each sheet as it is delivered to the

output tray. Loading several label sheets together may cause paper jams.

• Loading multiple sheets of heavyweight paper in the stack bypass may result in a

paper jam. In this case, load only one sheet at a time.

• When printing on envelopes, empty the output tray once 10 envelopes have

accumulated in the tray.

• Envelopes may become creased in the printing process.

NOTE

For high-quality printouts, use paper recommended by Canon.

Open the stack bypass.

If the paper size/type you are going to load

in the stack bypass differs from the default

paper size/type set for the stack bypass,

disable the default paper size/type

settings. (See “Standard Paper for the

Stack Bypass,” on p. 3-17.)

If you are loading large size paper, pull out

the auxiliary tray and extend the tray

extension.

Adjust the slide guides to match

the size of the paper.

Auxiliary Tray Tray Extension

Slide Guides

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 263 264

Pas de commentaire

Canon image runner 2535 Guide de l'utilisateur Page 47