Canon image runner 2535 Guide de l'utilisateur télécharger pdf (Page 172)

Identifying and Isolating Problems

6-5

Troubleshooting

The backside of the prints is smudged.

Cause The transfer roller is dirty.

Remedy Clean the transfer roller. (See “Transfer Roller Cleaning,” on p. 5-36.)

Toner smudges or bleeds easily on prints.

Cause In a high-humidity environment, excessive moisture inside the machine may

cause toner to smudge or bleed on prints.

Remedy Use Special Mode F. This mode prevents excessive moisture inside the

machine from adversely affecting prints. (See “Preventing Toner from Smudging

or Bleeding on Prints,” on p. 6-60.)

Other Problems

Staples are jammed.

Cause Staples are jammed in the finisher.

Remedy Remove the jammed staples from the finisher. (See “Clearing Staple Jams,” on

p. 6-46.)

Prints are not delivered to the additional paper output tray.

Cause 1 None of the functions have been selected for Tray B, so no prints are delivered

to it.

Remedy Select the desired functions for Tray B. The prints for the selected functions are

delivered to the additional paper output tray. (See “Tray Designation,” on

p. 3-14.)

Cause 2 The optional Inner 2 Way Tray is not enabled.

Remedy Enable the optional Inner 2 Way Tray. (See Chapter 7, “Other System Settings,”

in the System Settings Guide.) After the Inner 2 Way Tray is enabled, select the

desired functions for Tray B. (See “Tray Designation,” on p. 3-14.)

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 263 264

Pas de commentaire

Canon image runner 2535 Guide de l'utilisateur Page 172