Canon i-SENSYS LBP352x Manuel d'utilisateur Page 508

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 642
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 507
Printing Problems
0X7U-06A
See Common Problems(P. 497) also.
Printing results are not satisfactory. Paper creases or curls.
When You Cannot Print Properly(P. 503)
You cannot print.
Check the Following.
Is the [ ] indicator lit or blinking? In this case, printing is in progress. Please wait for a while. If the
remaining data is not printed even after a while, select <Form Feed> or <Soft Reset> in the Reset menu.
Reset Menu(P. 451)
Is
( ) lit? If it is not lit, press ( ) to set the machine to online.
Online key(P. 25)
Can you print by Status Print or Network Status Print? If you can print, the machine has no problem. Check
the congured network and computer settings.
Printing Reports and Lists(P. 536)
Can you print a Windows test page? If you can print a Windows test page, there is no problem with the
machine or the printer driver. Check the print settings of your application.
Printing a Test Page in Windows(P. 618)
If the problems persist, check the items that suit your operational environment.
Wired LAN connection
Have you selected the correct port?
Checking the Printer Port(P. 619)
If the correct port is selected, click [Congure Port] of the [Ports] tab to check that the setting specied for
[Printer Name or IP Address] matches that congured in the machine.
If there is no port to use or the IP address of the machine is changed, generate a port by following the
procedure for changing the standard TCP/IP port described in the Printer Driver Installation Guide.
Is the computer communication restricted by rewalls? Use the operation panel to set <Address Filter> to
<Off>.
Restricting Communication by Using Firewalls(P. 264)
Address Filter(P. 392)
Disable security software and other resident software.
By following the procedure for changing the standard TCP/IP port described in the Printer Driver
Installation Guide, change the print protocol to LPD and enable LRP Byte Counting.
Reinstall the printer driver in accordance with the Printer Driver Installation Guide.
Can you print from other computers on the network? If you also cannot print from other computers,
contact your local authorized Canon dealer or the Canon help line.
If you are using the SMB network
Are the SMB settings congured correctly? In particular, check that the DHCP server and WINS server are
connected properly if you are using them. Conguring SMB(P. 242)
Troubleshooting
501
Vue de la page 507
1 2 ... 503 504 505 506 507 508 509 510 511 512 513 ... 641 642

Commentaires sur ces manuels

Pas de commentaire