Canon i-SENSYS LBP352x Manuel d'utilisateur télécharger pdf (Page 274)

100

101

Select the [Use Filter] check box and click the [Reject] or [Allow] radio button for the [Default

Policy].

[Use Filter]

Select the check box to restrict communication. Clear the check box to disable the restriction.

[Default Policy]

Select the precondition to allow or reject the communication of other devices with the machine.

[Allow]

Select to block communication packets when they are sent to or received from

devices whose IP addresses are entered in [Exception Addresses]. Communications

with other devices are permitted.

[Reject]

Select to pass communication packets only when they are sent to or received from

devices whose IP addresses are entered in [Exception Addresses]. Communications

with other devices are prohibited.

Specify address exceptions.

● Enter the IP address (or the range of IP addresses) in [Register Address] and click [Add].

Check for entry errors

● If IP addresses are incorrectly entered, you may be unable to access the machine from the Remote UI,

in which case you need to set <Address Filter> to <Off>. Address Filter(P. 392)

When you have selected [Reject] under [Default Policy]

● Neither multicast packets nor broadcast packets can be ltered.

Deleting an IP address from exceptions

● Select an IP address and click [Delete].

Click [OK].

For RX Filter

When selecting [Allow] under [Default Policy], specify the IP addresses of devices whose communication with

the machine should be blocked. When selecting [Reject] under [Default Policy], specify the IP addresses of

devices that should be able to communicate with the machine.

Security

267

1 2 ... 269 270 271 272 273 274 275 276 277 278 279 ... 641 642

Commentaires sur ces manuels

Pas de commentaire

Canon i-SENSYS LBP352x Manuel d'utilisateur Page 274

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimantes laser/LED Canon i-SENSYS LBP352x