Canon EOS 600D Manuel d'utilisateur télécharger pdf (Page 265)

265

With a commercially-available Eye-Fi card already set up, you can

automatically transfer captured images to a personal computer or

upload them to an online service via a wireless LAN.

The image transfer is a function of the Eye-Fi card. For instructions on

how to set up and use the Eye-Fi card or to troubleshoot any image

transfer problems, refer to the Eye-Fi card’s instruction manual or

inquire the card’s manufacturer.

The camera is not guaranteed to support Eye-Fi card

functions (including wireless transfer). In case of an issue

with an Eye-Fi card, please check with the card manufacturer.

Also note that approval is required to use Eye-Fi cards in

many countries or regions. Without approval, use of the card

is not permitted. If it is unclear whether the card has been

approved for use in your area, please check with the card

manufacturer.

Insert an Eye-Fi card. (p.29)

Select [Eye-Fi settings].

Under the [5] tab, select [Eye-Fi

settings], then press <0>.

This menu is displayed only when an

Eye-Fi card has been inserted into

the camera.

Enable the Eye-Fi transmission.

Press <0>, set [Eye-Fi trans.] to

[Enable], then press <0>.

If you set [Disable], automatic

transmission will not occur even with

the Eye-Fi card inserted

(Transmission status icon I).

Display the connection

information.

Select [Connection info.], then press

<0>.

Using Eye-Fi Cards

1 2 ... 260 261 262 263 264 265 266 267 268 269 270 ... 327 328

Pas de commentaire

Canon EOS 600D Manuel d'utilisateur Page 265