Canon EOS 600D Manuel d'utilisateur télécharger pdf (Page 190)

190

Regarding your Speedlite (slave unit), refer to its instruction manual and

set it as follows. The settings other than the below for the slave unit’s

control are all set with the camera. Different types of Canon Speedlite

slave units can be used and controlled together.

(1) Set the Speedlite as a slave unit.

(2) Set the Speedlite’s transmission channel to the same one as

the camera’s.

(3) If you want to set the flash ratio (p.196), set the slave unit ID.

(4) Position the camera and slave unit(s) within the range shown

below.

(5) Face the slave unit’s wireless sensor toward the camera.

*1: If the Speedlite does not have a transmission channel setting function, the

camera can work with any channel.

*2: In small rooms, the slave unit may work even if its wireless sensor does not face

the camera. The camera’s wireless signals can bounce off the walls and be

received by the slave unit. With EX-series Speedlite having a fixed flash head

and wireless sensor, make sure it fires, then take the picture.

Using Wireless FlashN

Slave Unit Settings and Position

Approx.

10m

(32.8ft.)

Approx.

(23.0ft.)

Approx.

Approx. 5m

(16.4ft.)

Approx. 7m

(23.0ft.)

Wireless flash set-up example

Indoors

Outdoors

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 327 328

Pas de commentaire

Canon EOS 600D Manuel d'utilisateur Page 190