Canon EOS 2000D Manuel d'utilisateur télécharger pdf (Page 75)

This is a connection mode available when using an access point

compatible with WPS. In pushbutton connection mode (PBC mode), the

camera and the access point can be connected simply by pressing the

WPS button on the access point.

 If multiple access points are active in the surrounding area, it may be

more difficult to establish a connection. In such a case, try using

[WPS (PIN mode)] to establish a connection.

 Check the position of the WPS button on the access point in

advance.

 It may take approx. one minute to establish a connection.

Select [Wi-Fi function].

 Under the [53] tab, set [Wi-Fi/NFC]

to [Enable], then select [Wi-Fi

function] (p.17).

 If a screen for setting a nickname (for

identification) appears, register a

nickname (p.14).

Select an item.

 Select [q] or [l], then press <0>.

 The camera’s <k> lamp will blink.

Select [Select a network].

 Select [Select a network] and press

<0>.

 Select [OK] and press <0> to go to

the next screen.

Connecting via WPS (PBC Mode)

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 143 144

Pas de commentaire

Canon EOS 2000D Manuel d'utilisateur Page 75