Canon LR1 Manuel de service Page 46

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 119
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 45
1.1.2 Error description
User-recoverable errors
1) Paper-feed error
The paper is not fed during the paper-feed operation.
2) Paper jam error
The paper cannot be delivered even when the paper delivery operation is executed for
584.2 mm (23 inches).
3) Cartridge not-loaded error
The cartridge is not loaded in the printer.
4) Cartridge mismatch error
The data sent by the personal computer does not match the installed cartridge.
Open the cartridge cover and install the correct cartridge. The error will then be
canceled. Pressing the
POWER
button to turn the printer on/off will also cancel the
error.
5) Failed manual feed warning
The paper cannot be fed manually with the manual feed tray.
6) Cartridge replacement auto-completion warning
The cartridge replacement mode has been disabled by the printer. Closing the
cartridge cover cancels the error.
7) Cartridge overheating warning
The cartridge temperature is high and the cartridge cover is also open.
8) Waste ink full warning
The total waste ink amount recorded in the EEPROM is close to the full capacity
(99% or higher).
User-unrecoverable errors
9) ROM error
The ROM check failed during initialization.
10) RAM error
The RAM check failed during initialization.
11) No-cartridge error
The printer is unable to detect the BJ cartridge at any position except at the
cartridge replacement position.
12) Home position error
The home position sensor is not working (line disconnected).
The carriage’s home position cannot be detected.
13) Waste ink full error
The total waste ink amount recorded in the EEPROM exceeds the full capacity
(100%).
14) Internal temperature sensor error
The temperature sensor (TH1) on the control board has a malfunction (line
disconnected).
15) Automatic correction error
The home position cannot be detected during printing position correction.
16) Head overheating error
The BJ cartridge temperature is abnormal.
17) EEPROM error
An error occurred during the writing to EEPROM.
3-3
LR1
Part 3: Operation
Operation
Vue de la page 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 118 119

Commentaires sur ces manuels

Pas de commentaire