Canon imagePROGRAF iPF8300 Guide de base télécharger pdf (Page 20)

Loading sheets when a roll is already loaded in the printer may

cause jams. We recommend removing rolls before loading sheets.

(→

, Removing the Roll from the Printer)

•

Before loading sheets, make sure the printer is clean inside the Top Cover and around the Ejection Guide . If these

areas are dirty, we recommend cleaning them in advance. (→ , If Paper is Soiled)

•

To prevent the roll from unwinding if you leave it loaded, wrap a

sheet of paper around the roll and tape it.

Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.•

Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.•

Load the paper straight. Loading paper askew will cause an error.•

If any paper has been advanced that will not be used, a message is shown requesting you to remove it.•

Press ▲ or ▼ to select Yes , and then press the OK button. Remove the paper and go to the next step.

Select sheets as the paper source.

Lift the Release Lever and open the Top Cover .

Loading Sheets in the Printer

Load sheets in the printer as follows.

If a print job was received•

Press the Load button.

Sheets are automatically selected, and the media type

and size speciﬁ ed by the print job are shown on the

Display Screen .

If no print job was received•

Press ▲ or ▼ to select Cut Sheet , and then press

the OK button.

Press ▲ or ▼ to select Load Paper , and then press the

OK button.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

Pas de commentaire

Canon imagePROGRAF iPF8300 Guide de base Page 20