Canon imagePROGRAF iPF8300 Guide de base télécharger pdf (Page 13)

Attaching the Roll Holder to Rolls

With the edge of the roll paper facing forward as shown,

insert the Roll Holder from the right of the roll. Insert

it ﬁ rmly until the roll touches the ﬂ ange (a) of the Roll

Holder , leaving no gap.

Insert the Holder Stopper from the left in the Roll Holder

as shown. Holding it at the position shown (b), push it

ﬁ rmly in until the ﬂ ange (a) of the Holder Stopper touches

the roll. Lock the Holder Stopper lever (c) by pushing it

down toward the shaft side.

Insert the respective attachments for the roll paper core

on the Roll Holder and Holder Stopper .

Using rolls with a 2-inch paper core•

Holder Stopper Side Roll Holder Side

Align the tips (a) of the 2-Inch Paper Core

Attachment with the holes (b) of the Holder Stopper

and insert it firmly.

No attachment is needed.

Using rolls with a 3-inch paper core•

Align the tips (a) of 3-Inch Paper Core Attachment

#2 with the holes (b) of the Holder Stopper and

insert it firmly.

Align the tips (a) of 3-Inch Paper Core Attachment

#1 with the holes (b) of the Roll Holder and insert it

firmly.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 47 48

Pas de commentaire

Canon imagePROGRAF iPF8300 Guide de base Page 13