Canon T3 Brochure télécharger pdf (Page 31)

usa.canon.com/eos

EOS SYSTEM ACCESSORIES

* EOS RT, 650, 630 and 620 require Grip GR20 with built-in T3 remote socket.

** T3 accessories require Remote Switch Adapter RA-N3 with N3-series cameras.

EF 100mm f/2.8L Macro IS USM •f/5.6 •1/80 sec.

EOS 7D with Wireless File Transmitter WFT-E5A

* With no obstructions between the transmitting and receiving antennas, and no radio interference. With a large, high-performance antenna attached to the wireless LAN access point.

** The EOS 5D Mark III and EOS 7D require a firmware upgrade (which is now available) to be compatible with the GPS Receiver GP-E2.

*** In certain countries and regions, the use of GPS may be restricted. Therefore, be sure to use GPS in accordance with the laws and regulations of your country or region. Be particularly

careful when traveling outside your home country. As a signal is received from GPS satellites, take sufficient measures when using in locations where the use of electronics is regulated.

Note: When the EOS 7D is used with the GP-E2 the following restrictions will apply: a) geotagging function will not work for movies while recording; b) geotagging features will not work for

movies when using the Map Utility; c) electronic compass information and automatic time setting is not available; d) transmission via the hot shoe is not possible.

Wireless File Transmitters and GPS Receivers

Canon’s Wireless File Transmitters help enable fast, wireless image transfer from EOS cameras

directly to a computer. Canon GPS receivers record location, including latitude, longitude and altitude,

include a compass, and can track the trajectory of the photographer’s movements.

Remote Control & Accessories

Canon accessories are the perfect choice to help enhance your EOS System’s

performance. Whether through recording data or controlling your camera remotely,

Canon’s own accessories are designed to complement your EOS camera.

Wireless File Transmitter

WFT-E7A

Wireless File Transmitter

WFT-E6A

Wireless File Transmitter

WFT-E5A

Compatibility

EOS 5D Mark III

EOS-1D X

EOS 7D

Description

Designed for the EOS 5D Mark III. It transfers images from cameras

directly to a computer via wireless local area networks (LAN),

and offers a number of enhanced features to improve efficiency for

studios and media professionals including: wireless support for

IEEE 802.11 a/b/g and the latest standard 802.11n, which deliver

blazing communication speed, camera clock synchronization, linked

shooting function, Bluetooth support, and auto re-send of images

that were not sent during a sending error.

Canon’s Wireless File Transmitter WFT-E6A is designed for the

EOS-1D X. It transfers images from cameras directly to a computer via

wireless local area networks (LAN), and offers a number of enhanced

features to improve efficiency for studios and media professionals

including: wireless support for IEEE 802.11 a/b/g and the latest

standard 802.11n, which deliver blazing communication speed,

camera clock synchronization, linked shooting function, Bluetooth

support, and auto re-send of images that were not sent during a

sending error.

This wireless transmitter is dedicated to the EOS 7D. The transmitter

is compatible with Wi-Fi Protected Setup to connect easily to a

wireless LAN access point and automatically leads to the security

setting for secure image transfer. Images can be stored in selected

folders and the entire folder can be transferred. Added features

include IEEE 802.11a/b/g compatibility, WPS compatibility, WFT

server EOS 7D, camera linking function and Bluetooth function. It

allows wireless transmission (802.11a, b or g) to Mac or Windows

computers up to 492 ft.

Wireless File

Transmitter

WFT-E4 II A

Wireless File

Transmitter

WFT-E4A

Wireless File

Transmitter

WFT-E3A

Wireless File Transmitter

WFT-E2A

Compatibility

EOS 5D Mark II EOS 5D Mark II EOS 50D, 40D EOS-1D Mark IV, 1Ds Mark III, 1D Mark III

Description

This wireless transmitter is dedicated to the

EOS-5D Mark II with firmware upgrade. The

transmitter is compatible with Wi-Fi Protected

Setup to connect to a wireless LAN access point

and automatically leads to the security setting

for secure image transfer. Images can be stored

in selected folders and the entire folder can be

transferred. Added functions include IEEE 802.11

a/b/g compatibility, WPS compatibility, camera

linking function, Bluetooth function, media server

function and WFT server Remote Live View. It allows

wireless transmission (802.11a, b or g) to Mac or

Windows computers up to 492 ft.

This wireless transmitter is dedicated to the

EOS 5D Mark II. The transmitter is compatible with

Wi-Fi Protected Setup to connect easily to a

wireless LAN access point and it automatically

leads to the security setting for secure image

transfer. Sending a batch of photos wirelessly is

easy with the WFT-E4A. Images can be stored in

selected folders and the entire folder can be

transferred at once. It retains the same features as

the WFT-E3A including great handling for vertical

shooting and wireless transmission (802.11b

or g) to Mac or Windows computers up to 492 ft.

(150m)* away.

This wireless transmitter is dedicated to the EOS

50D and 40D camera. Completely integrated

design for outstanding handling; includes vertical

controls. Wireless transmission (802.11b or g)

to Mac or Windows computers. Three separate

wireless methods, including wireless remote

control of camera from computer. Transmits up to

492 ft. (150m)*, depending on environment and

computer set-up; wired Ethernet connection up to

1,000 ft. (330m). Its USB port allows an external

hard drive to be directly connected to the camera.

Canon’s Wireless File Transmitter WFT-E2A allows

photographers to transmit images from cameras

directly to a computer over a wired or wireless

local area network (LAN), incorporates a number of

significant features into a robust, camera-powered

system to make wireless transfer up to 492 ft.

(150m)* faster, simpler and less cumbersome

than WFT-E1A. The WFT-E2A is smaller and at-

taches to the side of the camera.

Wireless

Controller LC-5

Remote Switch

RS-80N3

Timer Remote

Controller TC-80N3

Remote Switch

60T3

Compatibility

All EOS cameras except

EOS 60D, EOS M and Digital Rebel series,

1v Hs, 1v, 3

All EOS cameras except

EOS 60D, EOS M and Digital Rebel series,

1v Hs, 1v, 3

All EOS cameras except

EOS 60D, EOS M and Digital Rebel series,

1v Hs, 1v, 3

N3-compatible cameras**, with adapter 1n RS,

1n, 1, A2/A2e, RT,* 630*, 620*, 650*

Description

•Anextended-rangeWirelessControllersystem

designed for EOS cameras with N3 remote

control sockets.

•Providesremoteshutterreleasecapability.

•Max.transmittertoreceiverdistanceof

300 ft./91.5m

•Remoteswitchtopreventcamerashakefor

super-telephoto or macro shots and bulb

exposures.

•WorkslikeaShutterbutton,enablinghalfway

or complete pressing.

•Shutterreleaselock.

•ConnectstoN3-typesocket.

•Cordlength:2.6ft./80cm.

•Remoteswitchwithself-timer,intervaltimer,

long-exposure timer, and exposure-count

setting feature.

•Timersetfrom1sec.to99hrs.,59min.,59sec.

•Easyoperationswithnewdial.

•IlluminatedLCDpanel.

•N3-typeconnector.

•Cordlength:2.6ft./80cm.

•Electromagneticcablereleasewith

a 3-pin terminal.

•Allowsindependentcontroloflightmetering

and shutter release.

•Cordlength:2ft./60cm.

Remote Switch

RS-60E3

Wireless Remote

Controller RC-1

Wireless Remote

Controller RC-6

Wireless Remote

Controller RC-5

Compatibility

EOS 60D, Rebel T4i, T3i, T3, T1i, XSi,

Digital Rebel XTi/XT, Digital Rebel, ELAN 7 series,

ELAN II/IIe, Rebel T2, Ti, 2000, G, X, XS, XSN, IX

EOS 5D Mark II, 7D, 60D, Rebel T1i, XSi,

Digital Rebel XTi/XT, Digital Rebel, ELAN 7 series,

II/IIe, ELAN, Rebel T2 Date, Ti Date, K2 Date, 10S

EOS 5D Mark III, 6D, 5D Mark II, 7D, 60D, Rebel

T4i, T3i, T2i, T1i, XSi, Digital Rebel XTi/XT, Digital

Rebel, ELAN 7 series, II/IIe, ELAN, Rebel T2 Date, Ti

Date, K2 Date, IX, 10S

EOS 5D Mark II, 7D, 60D, Rebel T1i, Rebel XSi,

Digital Rebel XTi/XT, Digital Rebel, ELAN 7 series,

II/IIe, ELAN, Rebel T2 Date, Ti Date, K2 Date, IX,

10S

Description

•Compactremoteswitchreplicatingallthe

functions of a shutter release button.

•Cordlength:2ft./60cm.

•Miniatureinfraredtransmitter.

•Setforeitherinstantshutterreleaseor

2-sec. delay.

•Activatemirrorlockandbulbshutterfunctions.

•Operatesasfaras16.4ft./5m.

•Compactdesign.

•Operatesapproximately16.4ft/5mfromthe

camera.

•Setforeitherinstantshutterreleaseor

2-sec. delay.

•Activatemirrorlockandbulbshutterfunctions.

•Compactdesign.

•Operatesasfaras16ft./5mfromthecamera.

Remote Switch

Adapter RA-N3

Remote Switch

Adapter T3

Extension Cord

ET-1000N3

Extension Cord

1000T3

Compatibility

All EOS DSLR cameras except EOS 5D Mark II,

7D, 60D and Digital Rebel series, 1v Hs, 1v, 3

N3-compatible cameras**, EOS 1n RS, 1n, 1,

A2/A2e, RT*, 630*, 620*, 650*

All EOS DSLR cameras except EOS 5D mark II,

7D, 60D, 50D and Digital Rebel series,

1v Hs, 1v, 3

N3-compatible cameras**, EOS 1n RS, 1n, 1,

A2/A2e, RT*, 630*, 620*, 650*

Description

•Enablesold-model,T3terminal-equipped

accessories to be connected to cameras with

the N3-type socket.

•Enablesuseofremotecontroldeviceswith

standard 2-pin subminiature jacks with

T3-compatible EOS cameras.

•ConnectscompatibleEOScameraswith

Timer Remote Controller TC-80N3 or Remote

Switch RS-80N3.

•Cordlength:33ft./10m.

•UsedwithanyotherT3-compatibleaccessories

for extension.

•Cordlength:33ft./10m.

GPS Receiver GP-E2*** GPS Receiver GP-E1***

Compatibility

EOS-1D X, 5D Mark III**, 6D, 7D**, EOS Rebel T4i, EOS M EOS-1D X

Description

The GP-E2 allows photographers to geotag their photos. Its compact, lightweight design smoothly

integrates with the camera’s hot shoe or USB terminal without the need for additional power. The GP-

E2 automatically adds location information as EXIF data while shooting (latitude, longitude, altitude,

direction, universal coordinated time (UTC)). An on-board electronic compass supports shooting

even when held vertically, and the orientation can be displayed on a map with bundled software.

The camera’s clock can be easily set by the GP-E2’s atomic clock. It can also be used as a

stand-alone GPS logger.

To be used with the EOS-1D X, the GP-E1 is Canon’s first GPS Receiver. Its compact, lightweight design

smoothly integrates with the camera’s extension system terminal, allowing the hot shoe to remain

accessible without the need for additional power. The GP-E1 automatically adds location information

as EXIF data while shooting (latitude, longitude, altitude, direction, universal coordinated time (UTC)).

An on-board electronic compass supports shooting even when held vertically, and the orientation can

be displayed on a map with bundled software. The EOS-1D X’s clock can be easily set by the GP-E1’s

atomic clock.

Wireless File Transmitter Remote Controllers and Switches

Remote Control Accessories

GPS Accessories

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Canon T3 Brochure Page 31

Commentaires sur ces manuels

Produits connexes et manuels pour Caméscopes Canon T3