1 - 10
(2) Service mode
Function Procedures Remarks
Service test print
See “Service mode operation
procedures” below.
Set a sheet of A4/LTR- or larger-sized paper.
For print sample, see page 1-12.
EEPROM information print
See “Service mode operation
procedures” below.
Set a sheet of A4/LTR- or larger-sized paper.
For print sample, see page 1-13.
EEPROM initialization See “Service mode operation
procedures” below.
The following items are not initialized:
- USB serial number
- Destination settings (Japan / Overseas)
- Cleaning flag on arrival
- Waste ink counter
Waste ink counter reset See “Service mode operation
procedures” below.
Both the main and the borderless print waste
ink counters are reset at the same time.
Destination settings See “Service mode operation
procedures” below.
Overseas: i470D
Japan: PIXUS 470PD
Print head deep cleaning Cleans black and color, simultaneously.
Operation panel display
confirmation
See “
Operation panel operation
confirmation procedures”
below.
Confirm the operations of operation panel
display and operation buttons. Perform the
confirmation at operation panel replacement.
<Service mode operation procedures>
1) Close the access cover, and turn off the printer. While pressing the Resume/Cancel button, press and
hold the Power button. (The LED lights in green to indicate that a function is selectable.)
2) While holding the Power button, release the Resume/Cancel button.
3) While holding the Power button, press the Resume/Cancel button 2 times, and then release the Power
and Resume/Cancel buttons. (In the operation panel, “02” will be displayed. Each time the
Resume/Cancel button is pressed, the LED lights alternately in either orange or green. During
initialization, the LED blinks in green.)
4) When the LED stops blinking and lights in green, press the Resume/Cancel button the specified number
of time(s) according to the function listed in the table below. (Each time the Resume/Cancel button is
pressed, the LED lights alternately in either orange or green.)
Time(s)
LED
Function Remarks
0 times
Green Power off When the print head is not installed, the carriage returns
and locks in the home position.
1 time
Orange
Service test print When the Power button is pressed during printing, printing
stops, and the mode returns to step 4) above.
2 times
Green EEPROM information print
When the Power button is pressed during printing, printing
stops, and the mode returns to step 4) above.
3 times
Orange
EEPROM initialization
4 times
Green Waste ink counter resetting
5 times
Orange
Destination settings Proceed to the following steps 5) and then 6) to set the
destination.
6 times
Green Print head deep cleaning Cleans black and color, simultaneously.
7 times
Orange
Not used in servicing
8 times
Green Return to the menu selection
Return to step 4) above.
5) After the function (menu) is selected, press the Power button. The LED lights in green, and the selected
function is performed. (When the operation completes, the printer returns to step 4) above.)
<Destination setting>
6) Press the Resume/Cancel button the specified number of time(s) according to the destination listed in
the table below, and then the Power button.
Time(s)
LED Destination
1 time Orange
Overseas: i470D
2 times
Green Japan: PIXUS 470PD
(164 pages)
(376 pages)
(25 pages)
(92 pages)
(493 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels