Canon i475D Manuel de service télécharger pdf (Page 10)

1 - 4

2.2 Errors by LED Blinking in Orange and Green Alternately, or Lit in Orange

User unrecoverable errors

LED

alternate

blinking in

orange and

green

Panel display

Error Code

Error Solution

2 times 802

5100

Carriage error 1. Check that no foreign material

is inside the printer.

2. Replace the timing slit strip

film.

3. Replace the purge unit.

4. Replace the logic board ass’y.

4 times 804

5C00

Purge unit error 1. Check that no foreign material

is inside the printer.

2. Replace the purge unit.

3. Replace the logic board ass’y.

6 times 806

5400

Internal temperature error 1. Turn the printer off, and after a

short period of time, turn the

printer on again.

2. Replace the logic board ass’y.

7 times 807

5B00

Waste ink absorber full error

1. Replace the ink absorber.

2. Replace the logic board ass’y.

8 times 808

5200

Print head temperature rise

error

1. Turn the printer off, and after a

short period of time, turn the

printer on again.

2. Replace the print head.

3. Replace the logic board ass’y.

9 times 809

6800

EEPROM error Replace the logic board ass’y.

Lights in

orange

No display

6800

RAM error Replace the logic board ass’y.

*1:The error code is stored in the operator / service call history of the EEPROM information.

2.3 Warnings

Printer (no LED indications)

Displayed warning Remarks

Low black ink warning 1 (About half of the full amount remains.)

Low color ink warning 1 (About half of the full amount remains.)

Low black ink warning 2 (Little ink remains. “!”)

Low color ink warning 2 (Little ink remains. “!”)

Low black ink warning 3 (An unknown amount remains. “?”)

Low color ink warning 3 (An unknown amount remains. “?”)

The status is displayed on the BJ printer

driver status monitor.*

Print head temperature rise warning If the print head temperature is high

when the access cover is opened, the

warning is displayed.*

When the print

head temperature falls, the warning is

released.

Protection at excess rise of the print head temperature If the print head temperature exceeds the

specified limit, a Wait is inserted during

printing. When the print head

temperature falls, printing will resume

automatically.

: Only when the remaining ink amount detection function is enabled. (When disabled, there is no status

display.)

: At the warning, the carriage does not move to the ink tank replacement position when the access cover is

opened.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Commentaires sur ces manuels

Pas de commentaire

Canon i475D Manuel de service Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimer et scanner Canon i475D