Canon i-SENSYS LBP113w Manuel d'utilisateur télécharger pdf (Page 91)

Paper guides that are too loose or too tight may cause misfeeds or paper jams.

Replace the paper cover.

● When performing printing, open the paper stopper in advance so that the output paper does not fall out of

the output tray

Continue to

Specifying Paper Size and Type in the Drawer(P. 96)

When changing the paper size or type

● The factory

default settings for paper size and type are <A4> and <Plain>, respectively. If you load a

different size or type of paper into the machine, make sure to change the settings. If you do not change

the settings, the machine cannot print properly.

Printing on the Back Side of Printed Paper (Manual 2-Sided Printing)

● Y

ou can print on the back side of printed paper. Flatten any curls on the printed paper and insert it into the

awer, with the side to print face up (previously printed side face down).

- Load only one sheet of paper each time you print.

- You can use only the paper printed with this machine.

- You cannot print on the side that has previously been printed on.

- If you are using A5 size paper, the reverse side may not be printed correctly.

LINKS

Available Paper(P. 278)

Basic Operations

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 330 331

Pas de commentaire

Canon i-SENSYS LBP113w Manuel d'utilisateur Page 91