Canon i-SENSYS LBP113w Manuel d'utilisateur télécharger pdf (Page 45)

Setting IPv6 Addresses

2357-00W

The IPv6 addresses of the machine can be congured via the Remote UI. Befor

setting IPv6 addresses, check the IPv4 address settings (

Viewing IPv4

Settings(P.

43) ). You need to set the correct IPv4 settings to use IPv6 addresses.

The machine can use the following multiple IPv6 addresses:

Type Description

Link-local address An address that is only valid within a subnet or link and cannot be used to communicate with

devices be

yond a router. A link-local address is automatically set when the IPv6 function of the

machine is enabled.

Manual address An address that is entered manually. When using this address, specify the prex length and default

router address.

Stateless address An address that is generated automatically using the MAC address of the machine and the network

prex that is advertised by the router. Stateless addresses are discarded when the machine is

restarted (or turned ON).

Stateful address An address obtained from a DHCP server using DHCPv6.

● For more information about the basic operations to be performed when setting the machine from the

Remote UI, see Setting Up Menu Options from Remote UI(P. 166) .

Start the Remote UI and log in to System Manager Mode.

Starting Remote

UI(P.

159)

Click [Settings/Registration] on the Portal page.

Remote UI Screen(P. 160)

Select [Network Settings] [TCP/IP Settings].

Click [Edit] in [IPv6 Settings].

Select the [Use IPv6] check box and congur

the required settings.

Setting Up

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 330 331

Pas de commentaire

Canon i-SENSYS LBP113w Manuel d'utilisateur Page 45