Canon IPF810 Manuel d'utilisateur télécharger pdf (Page 65)

100

101

Control Panel

Paper Details

Setting Item Description, Instructions

Roll DryingT ime Specify the time to wait for the ink to dry for each sheet.

Scan W ait T ime Specify the time to wait for the ink to dry between each scan in

bidirectional printing, in consideration of how quickly the ink

dries. Note that printing will take longer if you specify a wait time.

Feed Priority Specify exact paper feeding, if desired. Normally , select

Automatic . Choose Print Length if you prefer to feed the

paper an exact amount. However , note that choosing Print

Length may result in slight banding in the direction of Carriage

scanning.

Adjust Length Displayed if Feed Priority is Print Length .

Adjustment relative to the amount of stretching or shrinkage of

the current paper .

Enter either the adjustment results from Print Pattern or the

discrepancy that you measured (as a percentage).

For paper that tends to stretch, increase the feed amount by

choosing a higher adjustment value. For paper that tends

to shrink, decrease the feed amount by choosing a lower

adjustment value.

Head Height Adjust the Printhead height. ( → P .654)

Skew Check Lv . If you print on Japanese paper (washi) or other handmade

paper that has an irregular width, choose Loose for a higher

skew detection threshold, or choose Off to disable skew

detection. However , if paper is loaded askew when detection is

Off , note that paper jams or Platen soiling may occur .

V acuumStrngth Specify the level of suction that holds paper against the Platen .

( → P .661)

W idth Detection When this setting is set to Off , the printer prints without

detecting the paper width. Specify Off when printing at a width

dif ferent from the paper width.

NearEnd RollMrgn Specify the minimum margin at the leading edge of roll paper to

ensure better printing quality at the leading edge.

Note that if you choose 5mm , it may lower the printing quality

at the leading edge and af fect feeding accuracy . The printed

surface may be scratched, and ink may adhere to the leading

edge. It may also cause the Platen to become soiled.

Cut Speed Choose the cutting speed. If you use adhesive paper , choosing

Slow helps prevent adhesive from sticking to the cutter and

keeps the cutter sharp.

T rim Edge First If a roll is loaded, the end of the paper will be cut.

(The paper type is

displayed here.)( *1 )

Cutting Mode Specify whether or not to cut with the standard round-bladed

cutter .

Choose Automatic to have the roll cut automatically after

printing. If you choose Manual , the paper will not be cut after

printing. Instead, a line will be printed at the cut position.

Choose Eject if you prefer not to have documents dropped

immediately after printing, as when waiting for ink to dry .

Printer Parts 51

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 813 814

Commentaires sur ces manuels

Pas de commentaire

Canon IPF810 Manuel d'utilisateur Page 65

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimantes grand format Canon IPF810