Canon FAX-JX210P Manuel d'utilisateur télécharger pdf (Page 35)

34 Receiving Faxes

Setting the Receive Mode

Once you have decided which mode is suitable for your needs, set the mode by pressing [Receive

Mode/Resolution].

1 Press [Receive Mode/Resolution].

Every time you press [Receive Mode/Resolution], the mode changes cyclically.

 Receiving Faxes: <FAX ONLY MODE>

 Receiving Both Documents and Telephone Calls Automatically: <Fax/

Tel Mode>

If you set <Fax/Tel Mode>, you can control precisely how the fax handles incoming calls by

adjusting the following settings:

z Adjust the time the fax takes to check whether a call is from a fax machine or a telephone

(<RING START TIME> setting).

z Adjust the length of time the fax rings when the call is a voice call (<TEL RING TIME>

setting).

z Set whether the fax switches to receive mode after the ring time set in <TEL RING TIME> has

elapsed (<DEFAULT ACTION> setting).

1 Press [Menu].

2 Use [{] or [}] to select <DATA REGSTRATION>, then press [Start/Copy]. The

LCD displays <USER SETTINGS>.

3 Use [{] or [}] to select <RX SETTINGS>, then press [Start/Copy]. The LCD

displays <ECM RX>.

4 Use [{] or [}] to select <FAX/TEL AUTO SW>, then press [Start/Copy]. The LCD

displays <RING START TIME>.

5 Press [Start/Copy].

6 Use the numeric buttons, or [{] or [}] to enter the time the fax waits before ringing

when it receives a call, then press [Start/Copy] twice.

7 Use the numeric buttons, or [{] or [}] to enter the time the fax rings while waiting

for someone to pick up the Handset, then press [Start/Copy] twice. The LCD

displays <RECEIVE>.

Note

z If paper jams, see “Troubleshooting” on page 60.

z If the Ink Lamp lights up faxes will be received to memory.

8SEC

22SEC

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 85 86

Pas de commentaire

Canon FAX-JX210P Manuel d'utilisateur Page 35