Canon CF-1 Guide de l'utilisateur télécharger pdf

PowerShot G2 Firmware Update

Equipment required for firmware update

You will need a properly formatted CompactFlash (CF) card of 2MB or greater capacity

for the firmware update. (The 32MB CF card supplied with your PowerShot G2 is an

excellent choice for this purpose.)

Use the dedicated AC power supply Compact Power Adapter CA-560 (included in the

camera set) during the firmware update. (Do not attempt to load the firmware update

without following this step.)

For users who do not have the equipment necessary for firmware update

Please contact :

The Canon Customer Support Center mentioned in the

Camera User Guide

: For USA and all other regions,

except Europe

The Local Canon Distributor listed in the Canon European

Warranty System List (EWS)

: For Europe

Precautions

Use the dedicated AC power supply Compact Power Adapter CA-560 for firmware update.

Do not shut off the power during the firmware writing operation. A power failure during the firmware

writing operation will disable the camera.

Do not open the CF card slot cover or press any camera buttons during the firmware writing operation.

Please read, understand and observe all precautions and instructions before attempting to update the

PowerShot G2's firmware. If you are not confident that you can install the firmware update by yourself,

then by all means allow the Canon Customer Support Center or the local Canon Distributor listed in the

Canon European Warranty System List (EWS) to assist you.

Preparation for firmware update

1 2 3 4 5 6 7

UploadFirmware 3

Résumé du contenu

Page 1

PowerShot G2 Firmware UpdateEquipment required for firmware updateYou will need a properly formatted CompactFlash (CF) card of 2MB or greater capacit

Page 2

Verify the file for firmware updatingVerify that the "G2_FirmUpdate1100" folder contains the following file/ folder.For Windows® :"G2_F

Page 3 - UploadFirmware

* If you use a PC card reader or a notebook type PC with a PC card slot, a CF-to-PC card adapter is required.(B) IF YOU DO NOT HAVE ANY OF THE ABOVE C

Page 4

PROCEDURE 2 : Start the camera with Replay mode2-1 Ensure the camera is powered from the AC power supply.2-2 Insert the CF card in the camera.2-3 Then

Page 5

PROCEDURE 3 : Select "Firm Update" from the menuPress the "MENU" button to display the Play menu, and then select "Firm Updat

Page 6

PROCEDURE 4 : Press the "SET" button to startPress the "SET" button to start writing the firmware update.Precautions :If you wait

Page 7

If the indicator LED keeps flashing for over 5 minutes while updating the firmwareThere is a possibility that the firmware updating procedure has fail