Canon EOS 1200D Manuel d'utilisateur Page 130

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 340
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 129
u Adjusting the Color Tone for the Light SourceN
130
With just one shot, three images with different color tones can be recorded
simultaneously. Based on the color temperature of the current white balance
setting, the image will be bracketed with a blue/amber bias or magenta/green
bias. This is called white balance bracketing (WB-BKT). White balance
bracketing is possible up to ±3 levels in single-level increments.
Set the white balance bracketing
amount.
In step 2 for “White Balance
Correction”, when you turn the <6>
dial, the “ ” mark on the screen will
change to “ ” (3 points).
Turning the dial to the right sets the B/
A bracketing, and turning it to the left
sets the M/G bracketing.
On the right, “
Bracket
” indicates the
bracketing direction and correction amount.
Pressing the <
B
> button will
cancel all the [
WB Shift/Bkt.
] settings.
Press <0> to exit the setting and
return to the menu.
Bracketing Sequence
The images will be bracketed in the following sequence: 1. Standard
white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard
white balance, 2. Magenta (M) bias, and 3. Green (G) bias.
White Balance Auto Bracketing
During WB bracketing, the maximum burst for continuous shooting will be lower and the
number of possible shots will also decrease to approx. one-third the normal number.
You can also set white balance correction and AEB together with white
balance bracketing. If you set AEB in combination with white balance
bracketing, a total of nine images will be recorded for a single shot.
Since three images are recorded for one shot, it takes longer to record the shot to the card.
BKT” stands for bracketing.
Vue de la page 129
1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 339 340

Commentaires sur ces manuels

Pas de commentaire