Canon S100 Guide d'installation télécharger pdf (Page 81)

Troubleshooting the Computer Connection

Double-Check:

1. Is the cable between the camera and computer correctly attached?

Windows Platform (➜ p. 9)

Macintosh Platform (➜ p. 57)

2. Has the camera been set to the mode for communicating with a computer?

• PowerShot S100 DIGITAL ELPH/DIGITAL IXUS

Slide the mode switch to the position and press the main switch to turn

on the power.

• PowerShot S10/S20

Turn the mode dial to the position.

3. Is the battery charge sufficient?

You are recommended to use the AC adapter when connecting to a computer.

If the above conditions are met, check the following items.

Windows Platform

• Have you tried switching the cable to a different port?

If there is more than one port, try switching the cable to another port.

• Are the communication settings appropriate?

If the settings for the port to which the camera is connected are incorrect, the

“Communication Settings” dialog will display.

Select [USB] or [RS-232C].

Select the port to which the

interface cable is connected.

If you are unsure to which serial

port you are connected, click the

[Auto Detect] button.

Normally you should not need to

change this setting, but set it to a

lower speed if you try everything

else and still cannot load images.

1 2 ... 76 77 78 79 80 81 82 83 84

Pas de commentaire

Canon S100 Guide d'installation Page 81