Canon S100 Guide d'installation télécharger pdf (Page 12)

1. Attach the supplied USB cable to a USB port directly on the computer

and to the DIGITAL terminal on the camera as shown below.

• There is no need to turn the camera or computer power off when attaching or

detaching the USB cables.

• Please consult your computer’s manual for the location of the USB ports.

2. Install the USB driver the first time you connect via a USB port. (➜ p. 13)

Precaution for Unplugging Cables

from the DIGITAL Terminal

• Always press the [PUSH] button on the

connector to detach the cable from the

camera’s DIGITAL terminal.

USB Port

DIGITAL Terminal

1. Open the DIGITAL terminal cover

by slipping a fingernail under the

top edge and pulling down.

USB Connector

2. Insert the connector so that the

marks on

the connector and camera align.

PUSH Button

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 83 84

Pas de commentaire

Canon S100 Guide d'installation Page 12