Canon imagePROGRAF iPF8300 Guide de base télécharger pdf (Page 8)

The Stand must be assembled by at least two people on a ﬂ at surface. Attempting assembly by yourself poses a

risk of injury or bending the Stand .

•

The iPF8300 alone weighs approximately 111 kg (244.7 lb). Moving the printer requires at least six people, holding

it on both sides. Be careful to avoid back strain and other injuries.

•

When assembling the Stand , lock the casters.•

In addition, always unlock the casters before moving the assembled Stand . Attempting to move the stand when the

casters are locked poses a risk of injury or damage to the location site.

When moving the printer, ﬁ rmly grasp the Carrying Handles (a)

under each side. The printer may be unsteady if you hold it at other

positions, which poses a risk of injury from dropping the printer.

•

Reinstalling the Printer

The basic workﬂ ow for reinstalling the printer is as follows.

For detailed instructions, see the Setup Guide .

Install the printer

Referring to the Printer Stand Setup Guide , assemble the Stand .

Mount the printer on the assembled Stand and tighten the screws

ﬁ rmly.

Assemble the stand

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Pas de commentaire

Canon imagePROGRAF iPF8300 Guide de base Page 8