Canon imagePROGRAF iPF8300 Basic Guide No.1 Manuel d'utilisateur télécharger pdf (Page 3)

Troubleshooting

Phenomenon Cause Corrective Action

The media take-up unit continues

rotating

There is a foreign object in the

path of the Media Take-up

Sensor .

Remove the foreign object from the Media Take-up

Sensor path. Arrange the Basket Cloth and Basket

Rod so they do not interfere with the Media Take-up

Sensor .

The size of clear film cannot be

detected

The Platen is soiled with ink or

other substances.

Open the Top Cover and clean the entire Platen .

(→

, If Paper is Soiled)

If the Media Take-up Unit continues rotating, contact

your Canon dealer for assistance.

The Media Take-up Sensor cord

is not connected to the Right

Media Take-up Unit correctly.

Reconnect the Media Take-up Sensor cord as

follows.

(→"Using the Media Take-up Unit (Optional)," User

Manual)

Turn the printer off.1.

Disconnect the Media Take-up Sensor cord from

the Right Media Take-up Unit and reconnect it

firmly, all the way in.

Turn the printer on.3.

1 2 3 4 5 6 7 8 ... 51 52

Pas de commentaire

Canon imagePROGRAF iPF8300 Basic Guide No.1 Manuel d'utilisateur Page 3