Canon iPF770 Guide d'installation télécharger pdf (Page 42)

•

Head Cleaning B

Use this mode if no ink is ejected at all, or if Head Cleaning A does not solve the problem.

Important

•

Do not remove the Maintenance Cartridge or ink tanks during either Head Cleaning A or Head Cleaning B.

Ink may leak or an error may occur.

•

If printing does not improve even if you execute Head Cleaning B, try repeating Head Cleaning B once or twice.

If this still does not improve printing, the Printhead may have reached the end of its useful life. Contact your

Canon dealer for assistance.

Note

•

By default, nozzles are checked at fixed intervals.

Configure the settings on the Control Panel menu in Nozzle Check.

(See "Menu Settings.")

➔User's Guide

Perform cleaning as follows.

On the Tab Selection screen of the Control Panel, press ◀ or

▶ to select the Settings/Adj. tab ( ).

Note

•

If the Tab Selection screen is not displayed, press the Menu button.

Press the

OK button.

The Set./Adj. Menu is displayed.

Press ▲ or ▼ to select Maintenance, and then press the OK button.

Press ▲ or ▼ to select Head Cleaning, and then press the OK button.

Press ▲ or ▼ to select Head Cleaning A or Head Cleaning B, and then press the OK button.

Head cleaning is now executed.

Print a test pattern to check the nozzles, and determine whether cleaning has cleared the nozzles. (See

"Checking for Nozzle Clogging.")

➔User's Guide

Cleaning the Printhead

iPF770 Series

Basic Guide

Consumables and Maintenance Cleaning the Printer

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 131 132

Pas de commentaire

Canon iPF770 Guide d'installation Page 42