Canon imagePROGRAF iPF6350 Guide de base télécharger pdf (Page 22)

Loading Sheets in the Printer

Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.•

Always load POP Board in the Front Paper Feed Slot for printing. Loading it in other ways may impair operation

and damage the printer.

•

Load only one sheet at a time.•

Straighten paper if it is warped before loading it.•

Load the paper straight. Loading paper askew will cause an error.•

After loading the paper, you cannot move it laterally to reposition it. Load the paper straight.

•

Sufﬁ cient space behind the printer is required when loading paper in the Front Paper Feed Slot . For

details on the installation space required, see the following section.

•

(→"Speciﬁ cations," User Manual)

Move the Width Guide (a) to match the size of paper

loaded.

Press the OK button.

Set the Width Guide against the edge of the paper to

prevent the paper from becoming crooked or wrinkled.

If a print job was received•

After the paper is advanced, the printer starts printing

the print job.

If no print job was received•

The printer now starts feeding the paper.

Loading Heavyweight Sheets in the Front Paper Feed Slot

If the message Leave 70cm (28") space behind printer.

is displayed, check the space behind the printer, pull up

the four Front Tray Guides above the Ejection Guide ,

and press the OK button.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 47 48

Pas de commentaire

Canon imagePROGRAF iPF6350 Guide de base Page 22