Canon EOS C500 Manuel d'utilisateur télécharger pdf (Page 106)

Special Recording Modes

106

Activating Interval Recording Mode and Recording

1 Open the [Special Rec] submenu.

[ 4K/2K/MXF Setup] > [Special Rec]

2 Select [Interval Rec] and then press SET.

•[INT STBY`] (during 4K and 2K modes) or [INT STBY] (during MXF

mode) appears at the top of the screen (with [INT] flashing).

3 Press the START/STOP button to begin recording.

• The set number of frames are recorded automatically at the set interval.

• The tally lamp illuminates.

• [INT] changes to [Ü INT] while recording frames.

4 Press the START/STOP button again to stop recording.

• All of the recorded frames are joined together into one clip.

•[INT STBY`] (during 4K and 2K modes) or [INT STBY] (during MXF mode) appears at the top of the screen

(with [INT] flashing).

• The tally lamp goes out.

NOTES

• You can use only one special recording mode at a time.

• While recording, you cannot change the interval or number of frames.

• Some frames at the point the recording was stopped may be recorded and added to the end of the clip.

• Interval recording mode will be deactivated if the special recording mode is changed or turned off. It will be

deactivated also if you change the video configuration.

• During this special recording mode, the running mode of the time code (A 84) can be set to [Rec Run] or

[Regen.]*. The time code advances by the number of frames recorded. If the running mode of the time code

(A 84) is set to [Free Run] or the time code is input from an external source, the running mode will switch to

[Rec Run] during special recording mode. When special recording mode is deactivated, the running mode will

return to its previous setting.

• During special recording mode, the time code signal will not be output from the MON. terminals, TIME CODE

terminal or HD/SD SDI terminal. During 4K and 2K modes, the time code signal will be output from the 3G-SDI

terminals.

* During MXF mode only.

Frame Recording Mode

Set the number of frames in advance. We recommend operating the camera remotely or stabilizing the camera,

for example, on a tripod. Sound is not recorded in this mode. During 4K and 2K modes, MXF clips will not be

recorded simultaneously on a CF card even if a card is inserted in the camera.

Operating modes:

[ 4K/2K/MXF Setup]

[

Special Rec]

[Off]

COPY

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 209 210

Pas de commentaire

Canon EOS C500 Manuel d'utilisateur Page 106