Canon EOS 7D Manuel d'utilisateur télécharger pdf (Page 201)

201

Normally, the Self Cleaning Sensor Unit will eliminate most of the dust

that might be visible on captured images. However, in case visible dust

still remains, you can append the Dust Delete Data to the image to later

erase the dust spots. The Dust Delete Data is used by Digital Photo

Professional (provided software) to erase the dust spots automatically.

 Get a solid-white object (paper, etc.).

 Set the lens focal length to 50mm or longer.

 Set the lens focus mode switch to <MF> and set the focus to infinity

(∞). If the lens has no distance scale, look at the front of the lens and

turn the focusing ring clockwise all the way.

Select [Dust Delete Data].

 Under the [y] tab, select [Dust

Delete Data], then press <0>.

Select [OK].

 Turn the <5> dial to select [OK],

then press <0>. After the automatic

sensor cleaning ends, a message will

appear. Although there will be a

shutter sound, a picture is not taken.

3 Appending Dust Delete DataN

Preparation

Obtain the Dust Delete Data

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 295 296

Pas de commentaire

Canon EOS 7D Manuel d'utilisateur Page 201