Canon PowerShot G5 X Manuel d'utilisateur Page 91

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 217
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 90
98
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Shooting Long Exposures (Bulb)
With bulb exposures, shots are exposed for as long as you hold down the
shutter button.
1
Specify bulb exposure.
z Set the shutter speed to [BULB], following
steps 1 – 3 in “Specic Shutter Speeds
and Aperture Values ([ ] Mode)”
(
=
97).
2
Shoot.
z Shots are exposed for as long as you
hold the shutter button all the way down.
The elapsed exposure time is displayed
during exposure.
Maximum continuous shooting time with this feature is 4 min.
16 sec.
Mount the camera on a tripod or take other measures to keep it
still and prevent camera shake. In this case, also disable image
stabilization (
=
54).
To avoid camera shake that may otherwise occur when pressing
the shutter button directly, you can shoot remotely (
=
155) or
use an optional remote switch (
=
174).
When [Touch Shutter] is set to [Enable], shooting is started by
touching the screen once and stopped by touching it again. Be
careful not to move the camera when touching the screen.
Shutter Speed (Sec.)
Available ISO Speed (
=
79)
[BULB], 30 – 1.3 [AUTO], [125] – [3200]
1 – 1/2000 [AUTO], [125] – [12800]
After you set the shutter speed and aperture value, the exposure
level may change if you adjust the zoom or recompose the shot.
Screen brightness may change depending on your specied
shutter speed and aperture value. However, screen brightness
remains the same when the ash is up and the mode is set to [
].
[ ]: Manual
Calculation of optimum exposure is based on the specied
metering method (
=
78).
The following operations are available when ISO speed is set to
[AUTO].
- Adjust exposure by turning the exposure compensation dial.
- Press the [
] button to lock the ISO speed. Screen brightness
changes accordingly.
Vue de la page 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 216 217

Commentaires sur ces manuels

Pas de commentaire