Canon PowerShot G1 X Manuel d'utilisateur télécharger pdf (Page 70)

Sorting

Images

Introduction/

Contents

Downloading

Images

Viewing

Images

Printing

Images

Editing

Images

Reference/

Index

Processing

Large Numbers

of RAW Images

Remote

Shooting

Specifying

Preferences

Playing Back

Movies and Saving

Still Photos

You can apply the same corrections to several images by first selecting

multiple images in the main window, and then performing correction

procedures (p.72).

Also, you can apply same corrections by copying the recipe of the

corrected image and pasting it onto the multiple images (p.95).

 Some noise appeared in the periphery of an image after

correcting [Peripheral illumination]

You can reduce the noise by using luminance and/or chromatic noise

reduction of the noise reduction function (p.66). However, if you had

applied high amount of [Peripheral illumination] correction to the

images that have been shot at night or with a high ISO speed, the

noise might not be reduced.

 The image appears with less resolution after correcting

[Distortion]

You can make the image similar to the one before correction by

applying more sharpness with the sharpness adjusting function

(p.67).

 The colors of the image became weaker after correcting [Color

blur]

You can make the image similar to the one before correction by

adjusting the color tone (p.53) and/or the color saturation (p.65) to

make the color deeper.

 The result of [Color blur] correction cannot be detected

[Color blur] correction is effective for correcting blue or red color blur

which occurs at the edge of the highlighted area of an image. If

conditions do not match, correction cannot be made.

Additional information

Correcting Multiple Images at a Time

The periphery of the image may be truncated when [Distortion]

correction is made.

This function enables the resolution of images to be increased by

removing any remaining aberration related to image-forming capability or

any deterioration of resolution resulting from diffraction phenomena.

These optical phenomena cannot be corrected under Lens aberration

correction (p.71). Correction is achieved using the designed value of

each lens. You can correct these optical phenomena in RAW images

which have been shot with compatible lenses. JPEG, TIFF, S-RAW, and

M-RAW images cannot be corrected. To use this function, [Lens data] for

the lens used to shoot images first needs to be downloaded to your

computer. Before using the Digital Lens Optimizer, it is recommended

that you set [Sharpness] or [Strength] for [Unsharp mask] for images to 0

Note that even though the EOS 20D/EOS 20Da, EOS 10D, EOS D2000,

EOS D30, EOS D60, EOS 350D, and EOS 300D are EOS cameras

supporting the Digital Photo Professional, they are not compatible with

the Digital Lens Optimizer. Also, note that the Digital Lens Optimizer is

compatible with the EOS 5D with the firmware version 1.1.1 and the

EOS 30D with the firmware version 1.0.6.

Digital Lens Optimizer

 To use this function, the EOS Lens Registration Tool (version

1.4.20 or later) must be installed.

 The Digital Lens Optimizer is also available for images shot with

an extender attached to a compatible lens.

 You cannot use the Digital Lens Optimizer with multiple-exposure

RAW images created on the camera.

 EF cinema lenses (CN-E lenses) are not compatible.

 [Diffraction correction] cannot be used at the same time as the

Digital Lens Optimizer.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 153 154

Commentaires sur ces manuels

Pas de commentaire

Canon PowerShot G1 X Manuel d'utilisateur Page 70

Commentaires sur ces manuels

Produits connexes et manuels pour Non Canon PowerShot G1 X