Canon EOS 6D Mark II Manuel d'utilisateur Page 428

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 610
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 427
428
Viewing Images on a TV Set
If the TV set connected to the camera with an HDMI cable is compatible
with HDMI CEC*, you can use the TV set’s remote control for playback
operations.
* An HDMI-standard function enabling HDMI devices to control each other so that
you can control them with one remote control unit.
1
Select [Ctrl over HDMI].
Under the [33] tab, select [Ctrl over
HDMI], then press <0>.
2
Select [Enable].
3
Connect the camera to a TV set.
Use an HDMI cable to connect the
camera to the TV set.
The TV set’s input will switch
automatically to the HDMI port
connected to the camera. If it does not
switch automatically, use the TV set’s
remote control to select the HDMI IN
port the cable is connected to.
Using HDMI CEC TV Sets
When the camera is connected to a TV set with an HDMI cable, 4K time-
lapse movies will be played back in Full HD quality (cannot be played
back in 4K quality).
Adjust movie sound volume with the TV set. The sound volume cannot
be adjusted with the camera.
Before connecting or disconnecting the cable between the camera and
TV set, turn off the camera and TV set.
Depending on the TV set, part of the image displayed may be cut off.
Do not connect any other device’s output to the camera’s <D>
terminal. Doing so may cause a malfunction.
Certain TV sets may not display the images due to incompatibility.
Vue de la page 427
1 2 ... 423 424 425 426 427 428 429 430 431 432 433 ... 609 610

Commentaires sur ces manuels

Pas de commentaire