Canon VB-M700F Manuel d'utilisateur télécharger pdf (Page 102)

6-26

Flow of Intelligent Function Setting

The intelligent functions are set according to the

procedure below. For details on the setting method, see

each setting page.

 Camera Position Settings

For details on the preset setting method, see “Preset

Setting Tool” (P. 6-16).

Obtain camera control privileges and select [Lock

camera position] before selecting a preset.

Set presets in advance using Preset Setting Tool

(P. 6-16).

 Intelligent Function Settings

When you click [Add] in the [Detection Setting List],

the [New Detection Settings] dialog box is displayed.

Set the [Detection Setting Number] and [Detection

Type] of the detection setting you want to add, and

then click [OK].

Up to 15 different detection settings can be

registered.

1 [Detection Setting Number]

Specify a detection setting number from 1 to 15 for the

detection area you want to set.

2 [Detection Type]

Select detection types that suit your purpose from

[Moving Object Detection], [Abandoned Object

Detection], [Removed Object Detection], or [Camera

Tampering Detection]. For details on detection types,

see P. 6-22.

To enable detection settings, select [Enable these

detection settings].

Clear this checkbox to disable a setting.

Set detection criteria while operating the camera and

checking the image in the image display area.

Set e-mail notification, upload, and audio playback to

be performed upon detection.

Click [Save settings] to save the settings in the

camera.

You can check the detection status of the specified

detection settings in the event display panel of the

Admin Viewer (P. 7-17).

Preset Setting Tool.

Important

It is strongly recommended that you preset the camera angle in

advance and lock the camera at a preset position with the

Intelligent Function Setting Tool. An angle of view that captures

the target object up close is also recommended.

Launch the Intelligent Function Setting Tool.

Set the camera position.

Add detection settings.

Enable Detection Settings.

Set detection criteria ([Detection Criteria] tab P. 6-27).

Set operations to be performed when a change in a

subject is detected ([Event] tab P. 6-28).

Save the detection settings in the camera.

Check the detection result.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 156 157

Commentaires sur ces manuels

Pas de commentaire

Canon VB-M700F Manuel d'utilisateur Page 102

Commentaires sur ces manuels

Produits connexes et manuels pour Caméras de surveillance de documents Canon VB-M700F