Canon XC10 Manuel d'utilisateur télécharger pdf (Page 35)

Connecting to an External Monitor

When you connect the camcorder to an external monitor for recording or playback,

connect the camcorder’s HDMI

OUT terminal to the monitor’s HDMI input terminal using

the supplied HTC-100/S High Speed HDMI Cable.

Connection Diagram

We recommend that you power the camcorder from a power outlet using the compact

power adapter.

NOTES

• The HDMI OUT terminal is for output only. Do not connect the camcorder to another

device’s output terminal using the HDMI OUT terminal as this will cause a malfunction.

• When using a commercially available HDMI cable, make sure the HDMI cable is Type A

to Type C and is no longer than 3 meters.

• Audio and video will not be output from the HDMI OUT terminal while Wi-Fi functions are

in use.

• Correct operation cannot be guaranteed when connecting the camcorder to DVI

monitors.

• Video may not be output correctly depending on the monitor.

• When [v Camera Setup] > [2] > [Rolling Shutter Reduction] is set to [i On

]

and recording starts, HDMI output will stop.

HTC-100/S High Speed

HDMI Cable (supplied)

HDMI OUT terminal

1 2 ... 30 31 32 33 34 35 36 37 38 39

Pas de commentaire

Canon XC10 Manuel d'utilisateur Page 35