Canon EOS 5000 Manuel d'utilisateur télécharger pdf (Page 18)

Loading and Removing Film

How to Load Film

When a roll of film is loaded, it is wound completely on the take-up spool.

Then as each photograph is taken, the film rewinds into the cartridge

frame by frame. The number of frames remaining on the roll of film is

continually displayed.

Please use DX-coded film, as the

camera uses this to automatically

detect and set the film speed. Films

with a speed ranging from ISO 25 to

5000 may be used.

■I Release the command dial lock by

* setting to any position other than L.

Open the back cover by raising the

back cover release.

Tilt the film cartridge as shown in

the diagram to insert.

Infra-red film cannot be used.

The shutter curtain is an extremely high-precision

mechanism and must never be touched. When

loading film, be very careful not to allow your fingers

or the film to come into contact with the shutter

curtain. Otherwise, the shutter curtain may be

damages or bent.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 63 64

Pas de commentaire

Canon EOS 5000 Manuel d'utilisateur Page 18