Canon Macro Twin Lite MT-26EX-RT Manuel d'utilisateur télécharger pdf (Page 93)

a: Advanced Multiple Flash Photography with Slaves A, B, and C Added

Take the picture.

Set the flash ratio for the firing group

(flash head + slave) A:B and the flash

exposure compensation amount for

slave C, following the procedure

described in “Multiple Flash

Photography with Slave C Added”

(p.88), then take the picture.

To fire flash heads A and B and the slave unit at the same flash output,

set <j> in step 1. You can set any of A, B, or C as the firing group

for the slave units.

To add slave A and B only, set <l> in step 1.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 127 128

INSTRUCTION 1
Introduction 2
Icons in this Manual 4
Basic Assumptions 4
Contents 5
Index to Features 7
Safety Instructions 8
CAUTION: 9
Nomenclature 10
Control Unit 11
LCD Panel 12
Provided Accessories 15
Getting Started with 17
Macro Flash Photography 17
Installing the Batteries 18
Attach the control unit 20
Secure the control unit 20
Detach the control unit 20
Adjusting the Flash Unit 22
Adjustment Guidelines 23
Using a Filter 25
Using a Hood 26
Turning on the Power 27
Auto Power Off Function 28
Lock Function 28
LCD Panel Illumination 29
Focus on the subject 30
Take the picture 30
Focusing Lamp 33
Modeling Flash 34
Attach the diffuser adapter 36
Set to <l> 38
Press the <F> button 38
Set the flash ratio 38
Single-side Firing 39
Press the <@> button 40
Set the flash exposure 40
Press the <E> button 41
Set the FEB level 41
FEL: FE Lock N 42
Display <c> 43
Display <r> 44
Set <4> and <5> 46
Select a flash head 46
Set the flash output 46
Set <4> or <5> 47
Clearing MT-26EX-RT SettingsN 49
Setting Flash Functions 51
3 Set the function 52
Select [Flash C.Fn settings] 56
Set the Custom Function 56
Radio Transmission Wireless 57
Multiple Flash Photography 57
Mode for Each Group 60
Transmission 60
Group Control 61
(p.78) is not possible 63
Master Unit Setting 64
Slave Unit Setting 64
Display <O> 65
Set a transmission channel 65
Set a wireless radio ID 65
Run the scan 66
Set a channel 66
Connection Indicator 67
Display <L> 68
Save or load the settings 68
Memory Function 68
Slave C Added 69
Check the performance 71
Master Units 73
Advanced Multiple Flash 74
Manual Flash Output 76
Set each firing group 79
Setting the flash mode 79
Firing group charge status 80
Optical Transmission Wireless 81
Display <N> 86
Transmission Channel Setting 86
Select a firing group 94
Set the firing group 94
Customizing the 97
MT-26EX-RT 97
Custom Function List 99
Personal Function List 99
C: Setting Custom Functions 101
) (FEB sequence) 102
C.Fn-18: 103
C.Fn-22: 103
(LCD panel illumination) 103
+ (Quick flash) 105
Reference 107
MT-26EX-RT System 108
Temperature Increase Warning 110
Troubleshooting Guide 112
The picture is very blurred 113
Functions cannot be set 113
Pictures are overexposed 115
Specifications 116
(at full output) 120
Using with a Type-B Camera 121
Model: DS401211 systems 123
Direct current 124
REGULATIONS 124

Commentaires sur ces manuels

Pas de commentaire

Canon Macro Twin Lite MT-26EX-RT Manuel d'utilisateur Page 93

Commentaires sur ces manuels

Produits connexes et manuels pour Flashs d'appareils photo Canon Macro Twin Lite MT-26EX-RT