Canon 518 SV Manuel d'utilisateur télécharger pdf (Page 15)

Checking the Power Level of Batteries

The power level of the batteries can be checked by turning the

shutter lock dial to "R", pressing the battery checker and checking

the position in the power level indicator.

If the needle reaches the blue zone, the betteries have sufficient

power level.

If the needle is in the white zone, the batteries have a power

level only for 24 fps or under.

If the needle is in the red zone, replace all of the batteries.

■ When not using the camera, keep the shutter lock dial at "OFF”.

■ Always check the power level of the batteries before shooting.

■ The film cartridge with following speeds can be used.

Tungsten type : ASA 25, 40, 64, 100, 160, 250, 400

Daylight type : ASA 16, 25, 40, 64, 100, 160, 250

Loading of Film Cartridge

Open the rear cover by pressing the rear cover lock button.

O Slide the Super 8 film cartridge towards the front of the

^ camera with the film gate facing ahead. The film speed is

automatically set with the insertion of the cartridge.

2 Close the rear cover by pressing it.

k Set the shutter lock dial at "R”. Pull the trigger to confirm

” the film advance. If you can hear the sound of film winding

and the white dot in the film transport indicator revolves, it means

the cartridge is properly inserted.

■ The Super 8 film cartridge is loaded with 50-foot film. There

is no need for flipping over the cartridge in reverse direction

halfway through the film.

Footage Counter

The footage counter tells you how many feet of film you have

exposed. It automatically resets to "O" when the cartridge is

taken out.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 38 39

Pas de commentaire

Canon 518 SV Manuel d'utilisateur Page 15