1 Prepare the Printer
a Unpack the Printer.
Conrm the included items against the illustration printed on the lid of the
packing box.
A USB cable is necessary to connect the printer with your computer.
b Place the printer on a at and horizontal surface, and do not
place any objects in front of the printer.
Remove all the shipping tapes.
c Connect the power cord to the AC adapter. Plug the AC
adapter into the printer, and connect the other end of the
power cord to a power outlet. Then press the Open button to
open the Paper Feed Tray and the Paper Output Tray.
Open button
d Open the Paper Feed Tray and fold it in half. Then press the
ON/OFF button.
The Language selection screen will be displayed.
The Paper Output Tray
will open automatically.
Paper Feed Tray
ON/OFF button
Important
If the Alarm lamp is lit orange and an error message is displayed, see “Error
Message Is Displayed on the LCD” in the Direct Photo Guide.
e Use the { or } button or the Easy-Scroll Wheel on the
Operation Panel to select the language for the LCD, then
press the OK button.
Easy-Scroll Wheel
Important
If an unintended language is displayed on the LCD, press the Back button to
return to the Language selection screen.
f Write down the serial number located on the bottom face of the
printer. You will need this to register your product.
Serial Number
2 Install the ink tank
d Insert the ink tank at a slant.
Align the mark ▲ on the ink tank and
the mark ▼ on the printer.
e Press the mark on the ink tank until it clicks into place and
then its lamp lights red.
Caution
If the front (innermost) part of the ink tank (A) is sticking up, push down on the
Canon logo on the ink tank as illustrated below. Do not remove the ink tank
forcibly.
(A)
Important
If the lamp does not light red after it is inserted, repeat steps d and e.
f Open the Printer Cover slightly, pull the Lock Lever to unlock,
and then close the Printer Cover.
Lock Lever
Important
The printer starts operating. Wait about 1 minute until the printer stops making
operating noises.
Note
An error message will be displayed on the LCD if the Print Head Lock Lever is not
set properly or the ink tank is not installed properly. Open the Printer Cover and make
sure that the lock lever is set properly and ink tank is installed properly.
Note
For the ink tank compatible with this printer, refer to the back cover of the Direct Photo
Guide.
a Slide the Lock Switch to the right.
b Hold the Lock Switch in position, and lift the Printer Cover.
The cover will be locked if it is fully lifted.
The procedure for installing the ink tank is displayed on the LCD.
Printer Cover
The Print Head Holder moves to the center of the printer.
Install the ink tank here.
Important
If the Printer Cover is left open for more than 10 minutes, the Print Head Holder
moves to the right. Close and reopen the Printer Cover to return the holder to
the center.
c Remove the orange protective cap and discard it.
Protective Cap
Ink Ports
Electrical Contacts
Important
Do not touch the electrical contacts or the ink ports.
Do not reattach the protective cap once you have removed it.
•
•
Important
When cleaning the exterior of the printer, use a soft cloth to wipe it gently. For details, refer to “Cleaning Your Printer” in the User’s Guide on-screen manual.
3 Align the Print Head
a Load a sheet of the SUPPLIED 5" x 7" / 127.0 x 177.8 mm
paper into the Rear Tray with the printing side (whiter side)
facing front. Align the paper with the right side of the Rear
Tray, then slide the Paper Guide toward the left edge of the
paper.
Rear Tray
Paper Guide
Align the right side.
5" x 7" / 127.0 x 177.8 mm
bWhen the message requesting head alignment is displayed on
the LCD, press the OK button.
A pattern is printed and the Print Head is aligned automatically.
Note
The pattern is printed in black and blue only.
Automatic Print Head Alignment will take about 4 minutes to complete. Do not start
another operation until the printer has stopped making operating noises.
If Automatic Print Head Alignment cannot be executed correctly and a message is
displayed on the LCD, please refer to “Error Message Is Displayed on the LCD” in
the Direct Photo Guide.
Hardware setup and Print Head alignment is complete.
If you are connecting the printer to a computer, please see the back side of
this sheet for Software Installation Instructions.
•
•
•
(16 pages)
(16 pages)
(39 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels