Canon PIXMA MP600 Manuel d'utilisateur télécharger pdf

Start Here

Easy Setup Instructions

Turn the Easy-Scroll Wheel

left or right to easily select

a menu or a setting item.

For details, refer to “Basic

Operation for the Operation

Panel” in the Quick Start

Guide.

* You can also use the

}, [, or ] button to

select.

Cassette

Easy-Scroll Wheel

For information on how to load paper in the

Cassette, refer to “Loading Paper in the

Cassette” in “Loading Printing Paper” of the

Quick Start Guide.

Unpack the Machine

QT5-0683-V02

Hardware setup and Print Head

alignment is complete.

a Place the machine on a ﬂat and

horizontal surface, and do not place

any objects in front of the machine.

Open the Sheet Feeder Cover and

pull the Paper Support, then the Paper

Output Tray and open the Output Tray

Extension.

Caution

Before turning on the machine, remove all of the

shipping tapes.

Important

Do not connect the USB cable until after the soft-

ware is installed.

Note

To open the Paper Output Tray, put your ﬁnger in the

rounded indent of the tray and open it gently.

b Plug the power cord in the back of the

machine and connect the other end to

the wall outlet.

Important

Make sure that the Document Cover is closed.

c Open the Operation Panel, then press

the ON/OFF button to turn on the

machine.

1 Prepare the Machine 2 Install the Print Head 3 Install the Ink Tanks 4 Align the Print Head

d Use the { or } button on the

Operation Panel to select the language

for the LCD, then press the OK button.

(1) Press the { or }

button to select the

language.

(2) Press the

button.

Important

If an unintended language is displayed on the

LCD, press the Back button to return to the Lan-

guage selection screen.

Once the message “Install the print head and

set the ink tank.” appears, go to e.

e Open the Scanning Unit (Printer Cover)

until it locks into place. The Print Head

Holder moves to the center.

Scanning Unit (Printer Cover)

Important

For your safety, always ﬁrmly grip the areas il-

lustrated when opening the Scanning Unit (Printer

Cover).

Open the Inner Cover. Write down

the serial number located inside the

machine. You will need this to register

your product.

Inner Cover

Serial Number Location

a Remove the Print Head from its

package.

Caution

There may be some transparent or light blue ink

on the inside of the bag the print head comes in,

or the inside of the protective cap - this has no

effect on print quality. Be careful not to get ink on

yourself when handling these items.

b Remove the orange protective cap from

the Print Head and discard it.

Protective Cap

Print Head Nozzles

Electrical Contacts

Note

Do not touch the print head nozzles or the electrical

contacts.

c Firmly raise the Print Head Lock Lever

until it stops.The Print Head Lock Lever

may feel heavy.

d Insert the Print Head.

Do not touch!

e Lower the Print Head Lock Lever

carefully.

Important

If the Scanning Unit (Printer Cover) is left open

for more than 10 minutes, the Print Head Holder

moves to the right. Close and reopen the Scanning

Unit (Printer Cover) to return the Holder to the

center.

a Peel back the orange tab completely

and remove the plastic wrapper from

the ink tank.

If the orange-colored protective ﬁlm is not removed

completely, problems with printing may occur.

b Twist off and discard the orange

protective cap located on the bottom of

the ink tank.

Electrical Contacts

Ink Port

Protective Cap

Do not press!

Important

• Do not touch the electrical contacts.

• Do not touch the ink port.

c Insert the ink tank into the right-hand

slot and press the mark on the ink

tank until it clicks into place.

d Make sure the ink lamp lights red.

Refer to the color

guide on the Print

Head Lock Lever.

e Close the Inner Cover and the

Scanning Unit (Printer Cover).

Important

• For your safety, always firmly grip the areas il-

lustrated when closing the Scanning Unit (Printer

Cover).

• The machine starts operating. Wait about 2 min-

utes until the machine stops making noise.

a Pinch the Paper Guide and slide it to

the left end.

Paper Support

Extension

Paper Guide

b Load a sheet of letter- or A4-sized

blank paper in the Auto Sheet Feeder,

align the paper with the right side of

the Cover Guide, then slide the Paper

Guide against the paper stack.

Paper Guide

Cover Guide

Print Side

c Make sure that Yes is selected in the

message requesting head alignment,

then press the OK button.

Note

Print Head alignment takes about 6 minutes to

complete. Do not start another operation here.

The pattern is printed. And Print Head is aligned

automatically.

Note

• The pattern is printed in black and blue.

• When Automatic Print Head Alignment cannot be

executed correctly, the message “Auto head align

has failed.” is displayed on the LCD. Refer to “Error

Message is Displayed on the LCD” in the User’s

Guide on-screen manual.

Photo All-in-One

• Please conﬁrm the included items against the illustration printed on the lid of the packing box.

• A USB cable is necessary to connect the machine with your computer.

1 2

Résumé du contenu

Page 1 - Start Here

Start HereEasy Setup InstructionsTurn the Easy-Scroll Wheel left or right to easily select a menu or a setting item. For details, refer to “Basic Oper

Page 2 - MP Drivers Installation

WindowsMacintosh Note• The screens below refer to Windows XP Service Pack 2 installation. Screens may vary depending on the operating system you are u